About Materials
Asteria
Pleasant to touch, very stretchy, lightweight and soft material that is resistant to odours and mould. Asteria material is suitable for sublimation print.
Composition: 80% polyester, 20% elastan
Grammage: 140 g/m2
Amazon
Smooth, resistant and fluid material of higher weight. Amazon is almost inelastic material with a slight brush on the reverse side providing more comfort for sportsman. Amazon material is suitable for sublimation print.
Composition: 100% polyester
Grammage: 300 g/m2
Batex
Pleasant to touch, soft and smooth material resembling soft cotton. Batex has many functional properties such as quick-drying, low weight and it is almost non-creasy. Batex material is also suitable for sublimation print.
Composition: 95% polyester, 5% elastan
Grammage: 180 g/m2
Cotton-espan
Elastic matt material that feels soft and non-artificial with a higher resistance to abrasion. Thanks to added elastane this material is stretchy and keeps its shape while maintaining all the good properties of natural cotton.
Composition: 89 % bavlna, 11 % elastan
Grammage: 220 g/m2
Bongo
Pleasant to touch, quick-drying, lightweight and breathable material with a characteristic mesh texture. Bongo is more elastic in width and enough pliant to body shape in length. However it keeps its firm character and doesn't become slack when being wet. Bongo material is suitable for sublimation print.
Composition: 100 % polyester
Grammage: 130 g/m2
Bongo light
Very light, elastic, breathable and quick-dry material with mesh texture. Stretch in width, length adapts to the shape of the body. However it keeps its solidity and doesn't get loose while wet.
Composition: 100 % polyester
Grammage: 110 g/m2
Coolsense
Extremely lightweight, flexible and breathable material with a more pronounced openwork structure. The knit construction promotes rapid wicking of sweat away from the body and very fast drying. The material is soft to the touch. The slightly satin look enhances the specific structure. The material is more elastic in the width direction, in the length direction it is sufficiently adaptable to the shape of the body, but retains its strength and minimises sagging under wet load. The material is suitable for the sublimation printing method.
Composition: 100% polyester
Grammage: 90 g/m2
Coolspark
Lightweight, quick-drying, breathable material with a characteristic openwork structure on the reverse side and a smooth reverse side. The knit construction promotes rapid wicking of sweat away from the body and very fast drying. The material feels soft and supple to the touch. The material is suitable for the sublimation printing method.
Composition: 100% polyester
Grammage: 135 g/m2
Coolswift
Lightweight, breathable, flexible material with a fine texture on the face and slightly increased abrasion resistance. The knit construction promotes rapid wicking of sweat away from the body and subsequent drying. The material is suitable for the sublimation printing method.
Composition: 100% polyester
Grammage: 130 g/m2
Coolsky
Ultra-light, quick-drying, breathable material with a fine perforated structure and a cooling effect on the reverse side thanks to a specific combination of polyester and polyamide fibres. The material is very soft and smooth to the touch, slightly satiny in appearance. It is more elastic in the width direction and sufficiently adaptable to the body shape in the length direction, but retains its strength and minimises sagging under wet load. The material is suitable for the sublimation printing method.
Composition: 100 % polyester
Grammage: 85 g/m2
Denoder
Lightweight, inelastic material that is pleasant to touch and with slighly gloss finish. Its biggest benefit is its resistance to abrasion. Denoder properties are very similar to once very popular Dederon material.
Composition: 100% polyester
Grammage: 100 g/m2
Denoder mesh
Extremely lightweight, inelastic material that is pleasant to touch and with a slightly gloss finish. This material has a distinct perforated structure for maximum breathability and lightness. It is highly resistant to abrasion and its properties are very similar to once very popular Dederon material. Denoder Mesh is suitable for sublimation print.
Composition: 100% polyester
Grammage: 80 g/m2
Dista
Pleasant to touch, soft, smooth and stretchy material that is extremely breathable due to finely perforated texture. It also has an attractive design. Dista is suitable for sublimation print.
Composition: 93 % polyester, 7% elastan
Grammage: 220 g/m2
Dryclim
Lightweight, breathable, soft and slightly stretch material with a unique dry-clim function that ensures quick drain of sweat from the body and subsequent drying. The right side is smooth, with rectangular texture. Reverse side is brushed which makes the surface smooth, slightly warm and does not stick to your body and feels comfortable. Dryclim is suitable for sublimation print.
Composition: 100% polyester
Grammage: 215 g/m2
Dryclim athletic
Extremely lightweight, quick-drying and breathable material with a coarse texture on the face side and soft reverse side. Knitwear texture together with a unique dry-clim function that ensures quick drain of sweat from the body and subsequent drying. Dryclim Athletic is more elastic in width and enough pliant to body shape in length though keeping its firm character and doesn't become slack when being wet. Dryclim Athletic is suitable for sublimation print.
Composition: 100% polyester
Grammage: 105 g/m2
Dryclim light
Lightened version of Dryclim material. Very breathable, soft, elastic material with a unique dry-clim function that ensures quick drain of sweat from the body and subsequent drying. The right side is smooth, with a square texture. The reverse side is brushed which makes the surface smooth, slightly warm and does not stick to your body and feels comfortable. Dryclim is suitable for sublimation print.
Composition: 100% polyester
Grammage: 170 g/m2
Drystorm
Very stretchy three-layer material with DryStorm membrane resistant to abrasion and water while maintaining breathability. This material is smooth on both sides without a thermal function on the reverse side. Drystorm is soft, comfortable to wear and with matt design. Drystorm is suitable for sublimation print.
Composition: 70 % polyester, 20 % elastan, 10 % polyuretan
Grammage: 270 g/m2
Water column: 10.000 mm
Breathability: 7.500 g/m2/24h
Ekynox
Highly breathable knitted textile with typical texture. It is shrink-proof and resistant to odours and mould.
Composition: 99% polyester 1% carbon vlákno
Grammage: 120 g/m2
Fitex
Extremely stretchy material with a property to adapt to body shape in all directions. Fitex is lightweight, quick-drying, soft and smooth. The texture is abrasion resistant and allows clean-cut technology - positility to cut off the material without any further neatening. Fitex is suitable for sublimation print.
Composition: 70 % polyester 30 % elastan
Grammage: 130 g/m2
Fleece
Very pleasant, soft, stretchy and warm material that is brushed on both sides. Its main properties are low weight for a relatively strong and resistant fabric.
Composition: 100% polyester
Grammage: 240 g/m2
Golford
Lightweight, stretchy, very smooth and breathable knitted fabric. Golford is resistant to washing and keeps it shape without shrinking. Golford material is suitable for sublimation print.
Composition: 100% polyester
Grammage: 125 g/m2
Espan
Very stretchy, smooth and soft material with matt design allowing a free movemnt of a sportsman. Higher density of the fibre makes it less translucent and also perfectly fitting while maintaingint its original shape. Espan is suitable for sublimation print.
Composition: 86% polyester, 14% elastan
Grammage: 190 g/m2
Espan athletic
Very stretchy, soft and smooth material with matt design and high fibre density. It is quick-drying, breathable and durable. Espan Athletic feels warmer than Espan but it is not brushed and therefore offering properties that are ideal to wear in changeable weather.
Composition: 86% polyamid, 14% elastan
Grammage: 230 g/m2
Espan color
Very stretchy, smooth and soft material with matt design allowing a free movemnt of a sportsman. It provides optimal adaptation to body shape whilst keeping its shape memory. Available in many colour versions.
Composition: 80 % polyamid, 20 % elastan
Grammage: 190 g/m2
Espan fit
Very elastic, soft fabric, medium weight with increased scratch-resistance. The fabric is pleasant, flowing, smooth on touch, matt in appearance. Thanks to high density of the fibre, it nicely fits to the body. The Espan Fit material is suitable for sublimation print.
Composition: 74 % polyester, 26 % elastan
Grammage: 180 g/m2
Espan grit
Very elastic, soft fabric, higher weight with increased scratch-resistance. The fabric is pleasant, flowing, smooth on touch, matt in appearance. Thanks to high density of the fibre and maximal elasticity, it nicely fits to the body and it’s possible to achieve a small compression while keeping the fabric opaque. The fabric is suitable for method of sublimation print.
Composition: 86 % polyester, 14 % elastan
Grammage: 240 g/m2
Espan shield
Very stretchy, smooth material of higher weight with similar properties as ESPAN material. It feels firmer but still allows free movement for an athlete. Higher density of the fabric makes it less transculent and provides optimal adaptation to body whilst keeping its shape memory. Espan Shield material is suitable for sublimation print.
Composition: 80 % polyester, 20 % elastan
Grammage: 240 g/m2
Espan speed
Very stretchy material of a medium weight with a special knitted texture of lengthway stripes that speed-up ventilation and air outflow. This material is used for particular panels of speed jerseys. Espan Speed material is suitable for sublimation print.
Composition: 80 % polyester, 20 % elastan
Grammage: 225 g/m2
Espan thermo
Very stretchy and soft material with properties that make it ideal to wear in a changeable weather. The right side is soft and matt and the reverse one is slightly brushed and therefore feels comfortable and warm while being of a small volume. Espan Thermo is suitable for sublimation print.
Composition: 88 % polyester, 12 % elastan
Grammage: 267 g/m2
Jabapex
Pleasant, soft, slightly stretchy fabric. Thanks to its composition (50 % wool / 50 % polyester), it combines the advantages of natural and artificial fibres. The wool provides comfort feeling while wearing, good absorption and increased abrasion resistance. The polyester supports functional characteristics such as quicker drying time, lightness, increased wrinkle-resistance and the possibility of sublimation print with slight streak effect.
Composition: 50 % bavlna, 50 % polyester
Grammage: 150 g/m2
Luvia
Extremely lightweight, inelastic textile with hydrophobic coating for maximum water resistance while maintaining breathability. It is pleasant to touch and smooth with a matt design. Luvia is suitable for sublimation print.
Composition: 100% polyester
Grammage: 70 g/m2
Meryl
Very stretchy, lightweight and quick-drying material of matt design. It is soft, velvety and pleasant to touch. Meryl allows free movement for an athlete and optimal body adaptation whilst keeping its shape memory.
Composition: 75 % polyamid, 25 % elastan
Grammage: 130 g/m2
Composition: 81 % polyester, 19 % elastan
Grammage: 140 g/m2
Mesh bike
Very stretchy, quick-drying and breathable material with a distinct perforated texture. The structure is corse and friction resistant. Mesh bike is elastic only in width which allows enough free movement for an athlete. It is firm in length and therefore keeping its shape and pockets don’t become slack when being full and wet. Mesh bike is suitable for sublimation print.
Composition: 100% polyester
Grammage: 115 g/m2
Mesh cube
Lightweight double-sided stretch material with a fine mesh square structure and low grammage. Soft and pleasant to the touch. Allows great freedom of movement and maximum adaptation to body shape. The material is suitable for the sublimation printing method.
Composition: 90 % polyester, 10 % elastan
Grammage: 120 g/m2
Mikrotex
Pleasant, airy and inelastic material of a matt design. It feels velvety and smooth.
Composition: 100% polyester
Grammage: 125 g/m2
Modal
Very pleasant to touch, soft, fluid and stretchy material that is resistant and keeps its shape memory. It doesn’t change its shape even after multiple washing due to its smooth surface with modal fibres that prevent its structure to wear. You will avoid grey, hard surface so typical for washing cotton knitwear including felt-like effect
Composition: 93 % modal, 7 % elastan
Grammage: 310 g/m2
Noviento
Extremely lightweight, inelastic, nylon material with a surface finishing. It is wind and water resistant and pleasant to touch. Noviento is smooth, soft and in a matt design.
Composition: 100% polyamid
Grammage: 45 g/m2
Pave
Lightweight material with minimal elasticity. It is pleasant to touch, soft, smooth and in a slightly gloss design. The right side is coated with hydrophobic layer which makes it water proof while maintaining its breathability. Pave is suitable for sublimation print.
Composition: 100% polyester
Grammage: 140 g/m2
Pavera
Lightweight, elastic and quick-drying textile that is also breathable and durable. This material is pleasant to touch, smooth and with a matt design. Pavera is suitable for sublimation printing.
Composition: 87 % polyester, 13 % elastan
Grammage: 150 g/m2
Polyester
Lightweight, breathable and slightly elastic material which is highly resistant to abrasion. Distinct ribbed texture ensures effective drain of sweat and quick drying. Polyester is suitable for sublimation print.
Composition: 100% polyester
Grammage: 140-160 g/m2
Polyester tube
Soft, comfortale, stretchy and smooth material resembling very fine cotton. Thanks to polyester this material has many functions such as quick-drying, lightness and minimal wrinkle-resistance. This material is provided in a shape of a tube and designed exclusivelly for seamless scarfs production. Polyester tube is suitable for sublimation printing.
Composition: 100 % polyester
Grammage: 140 g/m2
Rainflex
Lightweight two-layer membrane material with high resistance to water and wind while maintaining breathability. The material is slightly elastic, it is soft and comfortable to wear. The lower layer of the mesh texture absorbs inner moist and evenly distributes it to the membrane.
Composition: 100% polyamid + membrána (100% polyester)
Grammage: 100 g/m2
Water column: 8000 mm
Breathability: 2400 g/m2/24h
Rainfor
Extremely lightweight, two-layer membrane material with high resistance to water, wind while maintaining breathability.
Composition: 100% polyester + membrána (100% polyester)
Grammage: 53 g/m2
Water column: 8000 mm
Breathability: 2400 g/m2/24h
Rainsoft
Extremely lightweight, flexible, two-layer membrane material with a wind and water resistant finish. Comfortable to the touch, smooth, soft, matt in appearance. Available in black and fluo yellow.
Composition: 100% polyester + membrána
Grammage: 53 g/m2
Water column: 10.000 mm
Breathability: 7.400 g/m2/24h
Relif
Lightweight, stretchy, fluid and breathable material with a fine relief structure that ensures quick-drying and creates an interesting design. Relif is suitable for sublimation print.
Composition: 92 % polyester, 8 % elastan
Grammage: 150 g/m2
Roubaix
Stretchy, soft, breathable and pleasant to touch material with a high thermal insulation even in extreme climatic conditions. The right side is smooth and matt, the reverse side is brushed and creates soft and warm fleece surface. Roubaix is shrink-proof, resistant to odours and mould. Roubaix is suitable for sublimation print.
Composition: 86 % polyester, 14 % elastan
Grammage: 250 g/m2
Roubaix color
Very stretchy, soft, breathable and pleasant to touch material with a high thermal inslation even in extreme climatic conditions. The right side is smooth and matt, the reverse side is brushed and creates soft and warm fleece surface. Roubaix is shrink-proof, resistant to odours and mould. Available in many colour versions.
Composition: 86 % polyamid, 14 % elastan
Grammage: 250 g/m2
Rudy
Pleasant to touch, lightweight, breathable and quick-drying material with a fine square and perforated texture. Rudy is more elastic in width and adaptable to body shape in length. However it is firm and therefore keeps its shape and does not become slack when pockets are wet and full. Rudy is suitable for sublimation print.
Composition: 95% polyester, 5 % elastan
Grammage: 120 g/m2
Sali
Light comfortable material that absorbs sweat very effectively and is quick to dry. Sali is suitable for sublimation print.
Composition: 89% polyester 11% elastan
Grammage: 140 g/m2
Skytech
Extremely lightweight and quick-drying material. It is breathable, with a fine square structure and also elastic to all sides but in the same time firm and shape stable. Skytech is ideal for technology of glued seams. This material also offers UV protection, chlorine resistance, breathability and second skin effect. Skytech is suitable for a sublimation print.
Composition: 60 % polyester, 40 % elastan
Grammage: 83 g/m2
Silver
Lightweight, stretchy, quick-drying and breathable material with high resistance to abrasion. Silver is smooth, soft and pleasant to touch material with a matt design that offers comfortable cooling effect.
Composition: 85 % nylon, 15 % elastan
Grammage: 130 g/m2
Softshell
Three-layer membrane material with high resistance to wind and water while keeping breathability. Textile is abrasion resistant. The right side is smooth, matt and pleasant to touch. Reverse side is warm and with fleece-like surface. Available in many colour versions.
Composition: 100% polyester + membrána (100% polyuretan)
Grammage: 310g/m2
Water column: 10.000 mm
Breathability: 3000 g/m2/24h
Soften
Very pleasant, soft, fluid and stretchy material designed to drain sweat to the surface thanks to special texture on the reverse side. This side is very soft, velvety and gives feeling of comfort and dryness while still drying. Soften is suitable for sublimation print.
Composition: 88 % polyester, 12 % elastan
Grammage: 225 g/m2
Soften light
Lightweight version of Soften material. Very pleasant, soft, fluid and stretchy material designed to drain sweat to the surface thanks to special texture on the reverse side. This side is very soft, velvety and gives feeling of comfort and dryness while still drying. Soften Light is suitable for sublimation print.
Composition: 91 % polyester, 9 % elastan
Grammage: 150 g/m2
Tavolara
Stretch material of a medium weight with a special knitted texture that in combination with slightly slippery surface increases resistance to abrasion. This material is quick-drying, smooth to touch, shrink-proof and with matting design.
Composition: 80 % polyester, 20 % elastane
Grammage: 210 g/m2
Tchendan
Lightweight, almost inelastic material that is highly resistant to abrasion and dirt. The right side is smooth or with a fine ribbed texture and the reverse side is brushed and creates very pleasant and slightly warm feeling.
Composition: 100 % polyester
Grammage: 190 g/m2
Tritech
Revolutionary material of many functional properties. It is quick-drying, lightweight, breathable, very stretchy to all sides but also durable, shape stable, abrasion and chlorine resistant. It offers UV protection and thanks to 'second skin' effect, it is very comfortable to wear. This fabric is ideal for glued seams technology. Tritech is suitable for sublimation print.
Composition: 77 % polyester, 23 % elastan
Grammage: 130 g/m2
Tritech color
Revolutionary material of many functional properties. It is quick-drying, lightweight, breathable, very stretchy to all sides but also durable, shape stable, abrasion and chlorine resistant. It offers UV protection and thanks to 'second skin' effect, it is very comfortable to wear. This fabric is ideal for glued seams technology. Available in many colour versions.
Composition: 78 % polyamid, 22 % elastan
Grammage: 130 g/m2
Velaro
Very stretchy material of a medium weight with a special knitted structure that allows quicker ventilation and air drain. The combination of high elastane with given weight creates a firm material with a maximal adaptability to body shape and possible compression. Velaro is suitable for sublimation print.
Composition: 67 % polyester, 33 % elastan
Grammage: 220 g/m2
Windproof light
Lightweight, three-layer membrane material with high resistance to wind and water while keeping its breathability and surface coating allowing water draining. This material is stretchy, soft, pleasant to touch and in a matt design. Windproof light is suitable for sublimation print.
Composition: 100% polyester
Grammage: 125 g/m2
Water column: 10.000 mm
Breathability: 9.000 g/m2/24h
Windproof soft
Extremely lightweight, three-layer membrane material with a hight resistance to wind and water while keeping its breathability. Material is stretchy, it feels soft and has a matt design. Thanks to a special structure it is lighter and thinner than other membrane materials that we offer. Windproof soft is suitable for sublimation print.
Composition: 100% polyester + membrána (100% polyester)
Grammage: 95 g/m2
Water column: 5.000 mm
Breathability: 8000 g/m2/24h
Windproof zag
Three-layer membrane material with high resistance to wind and water while keeping its breathability. The reverse side has a special structure that allows quick water draining to the membrane. Windproof Zag is stretchy, soft, pleasant to touch and in a matt design. It is smooth on the right side and very comfortable and velvety on the reverse side. Windproof Zag is suitable for sublimation print.
Composition: 86 % polyester + 14 % elastan
Grammage: 250 g/m2
Water column: 5.000 mm
Breathability: 6.000 g/m2/24h
Windtex
Lightweight, stretchy, soft membrane material in a matt design that feels smooth. It is water and wind resistant while maintaining its breathability.
Composition: 100% polyester + membrána 100% polyuretan
Grammage: 110g/m2
Water column: 1.000 mm
Breathability: 1000 g/m2/24h
Zerowind athletic
Three-layer membrane material with high resistance to wind and water while maintaining its breathability and sweat permeability. Material is very smooth, soft, stretchy, lightweight and in a matt design. Zerowind Athletic is suitable for sublimation print.
Composition: 100% polyester
Grammage: 140 g /m2
Water column: 10.000 mm
Breathability: 10.000 g/m2/24h
Zerowind bike
Three-layer membrane material with high resistance to wind and water while maintaining its breathability and sweat permeability. Material is lightweight, smooth, soft, stretchy and in a matt design. Zerowind Bike is suitable for sublimation print.
Composition: 100% polyester
Grammage: 120 g/m2
Water column: 8.000 mm
Breathability: 10.000 g/m2/24h
Zerowind black
Warm three-layer membrane material with a high resistance to wind and water while maintaining its breathability and with a coating that allows water draining. Material is smooth, slightly elastic, it feels soft and it is in a matt design. The reverse side is thermo-insulated with a warm fleece layer.
Composition: 100% polyester
Grammage: 290 g /m2
Water column: 10.000 mm
Breathability: 11.500 g/m2/24h
Zerowind elastic
Three-layer membrane material with a hight resistance to water and wind and with a great breathability properties. Its surface is coated in Bio Water repellent for better water draining from the surface. This material is warm, stretchy to all sides, soft, smooth and in a matt design. It has a soft and warm fleece layer on the reverse side.
Composition: 86 % polyester, 14 % elastan
Grammage: 300 g /m2
Water column: 10.000 mm
Breathability: 20.000 g/m2/24h
Zerowind fine
Three-layer membrane material with a hight resistance to water and wind. It is maximum breathable and steam-water permeable thanks to a special elastic mambrane. Zerowind Fine is very smooth, soft, stretchy and in a matt design. The reverse side is slightly brushed. Zerowind Fine is suitable for sublimation print.
Composition: 100% polyester
Grammage: 235 g/m2
Water column: 8.000 mm
Breathability: 24.000 g/m2/24h
Zerowind light
Three-layer membrane material with a high resistance to water and wind while maintaining its breathability and sweat permeability. The material is soft, slightly stretchy and with a fine texture on the right side. Zerowind Light is suitable for sublimation print.
Composition: 89 % polyester, 11 % polyuretan
Grammage: 170 g/m2
Water column: 10.000 mm
Breathability: 7.500 g/m2/24h
Zerowind thermo
Warmer version of Zerowind Light material. Three-layer membrane material with a high resistance to water and wind while maintaining its breathability and sweat permeability. The material is soft, slightly stretchy and with a fine texture on the right side. The reverse side is thermo-insulated with a warm fleece layer. Zerowind Light is suitable for sublimation print.
Composition: 92 % polyester, 8 % polyuretan
Grammage: 305 g /m2
Water column: 10.000 mm
Breathability: 7.500 g/m2/24h
